Shenzhen Atnj Communication Technology Co., Ltd.
Lead the future, connecting the infinite. We extend your 2G,3G,4G and 5G,to touch the untouching. Shenzhen ATNJ Communication Technology Co.,LTD--Lead the future, connecting the infinite.
Add to Cart
Digital Tetra band selective repeater system
Tetra Digital Repeater is a telecommunications device used to extend the coverage range of Very High Frequency (Tetra: 30–300 MHz) digital radio communication systems. Here’s a concise
Core Functions:
1. Signal Reception:
* Receives weak/attenuated digital radio signals (e.g., DMR, dPMR, P25 Phase 2) within the Tetra band from user equipment (e.g., handheld radios).
2. Digital Processing:
* Decodes, regenerates, and error-corrects the digital signal (unlike analog repeaters that amplify noise).
3. Signal Retransmission:
* Rebroadcasts the cleaned digital signal at higher power to distant or obstructed areas.
Key Advantages:
* Extended Coverage: Overcomes terrain obstructions (buildings, hills) and Tetra range limitations (~5–50 km line-of-sight).
* Signal Integrity: Regeneration prevents noise/error accumulation, maintaining voice/data quality.
* Spectral Efficiency: Supports digital modulation (e.g., TDMA), enabling multiple users on one frequency.
Feature
* Digital filtering supports adjustable bandwidth, each band supports three sub-bands.
* Each sub-band is turned on and off, and gain control is performed separately.
* Donor signal monitoring for easy optimization and troubleshooting
* Intelligent algorithm to prevent UL interference.
* Self-control to minimize interference for new rollout e-Node B.
Technical Specifications:
| Items | Specifications | |
| System | Tetra | |
| Frequency Range | Uplink(Rx) | 380-385MHz |
| Downlink(Tx) | 390-395MHz | |
| Bandwidth | ≦ 20MHz/0.2MHz | |
| Maximum Output Power | Uplink | 20±2dBm |
| Downlink | 33±2dBm | |
| Maximum Gain | 80±3dB | |
| AGC Range | ≥20dB | |
| Maximum Input power(Non-Destructive) | ≤-10dBm | |
| VSWR | ≤ 2.4 | |
| System Delay | ≤ 6 μs | |
| I/O Impedance | 50 Ω | |
| Noise Figure | ≤ 8dB | |
| Spurious Emission | 9kHz~ 1GHz: ≤ -36dBm | |
| 1GHz~ 12.75GHz:≤-30dBm | ||
| Third-order Inter-Modulation | ≤ -40dBm | |
| RF Connector | 2*N-Female | |
| Power Consumption | ≤ 30W | |
| Power Supply | Input:AC100~ 240V, 50/60Hz | |
| Dimensions | 450*335*180mm mm | |
| Weight | ≤ 12kg | |
| Alarm Monitoring System | Alarm for Uplink Self-Oscillation | |
| Isolation Detection | Isolation Check During Boot Time | |
| Operating Temperature | -10 ~ +50 °C | |
| Application | Indoor or Outdoor(IP65) | |
| Relative Humidity Range | ≤95%(Non condensing) | |
| Mounting | Wall Mounting | |
FAQ:
1. Are you trading company or manufacturer ? Could I use our own logo and label? We are the factory, with good trading service.